Alternate Device Testing

I have problems trying to register in parallel, even with the two adapters on separate public IP addresses...

And Brandon confirmed these problems would happen.

Quote:

---

Originally Posted by burris

I asked Tim about this early on, but don't remember if there was an answer.

I'm not they will both register if in parallel.

---

Yes, I know and ran it in this mode for a while but had some issues at which point I pulled the plug. The purpose of the question was to determine if both adapters simultaneously on was considered a scenario that was expected to work and if Xponder was doing so.

I also suggested awhile back that maybe they could assign a temp DID for the testers...that way we could leave it hooked up and any testing wouldn't interfere with our main line.
I don't remember if I heard back..

Quote:

---

Originally Posted by Russell

I'm sure you've mentioned it somewhere in this thread ... but things change. Are you using the test devlce as a replacement for the original or are you running both in parallel?

---

I disconnected my PAP2 and I am using this instead. I did however "try" to make it work with both but it was a epic fail. Once you get it up and running you should not need the PAP2. It works fine.

Just an update for you guys --- you now should be able to use both the RT31P2 device and PAP2T / etc in parallel. We've made a change that will now allow this.

Happy Testing!
________
Glass Pipes

Quote:

---

Originally Posted by VOIPoBrandon

Just an update for you guys --- you now should be able to use both the RT31P2 device and PAP2T / etc in parallel. We've made a change that will now allow this.

Happy Testing!

---

Well I am happy with device as is but this will make some of the others more likely to use theirs. Sounds good.

Just re-enabled that line on my pap2 so both devices now active and seems to be working correctly...

:)

Quote:

---

Originally Posted by chpalmer

Just re-enabled that line on my pap2 so both devices now active and seems to be working correctly...

:)

---

If you hook up both ATAs and they are both provisioned to your main number along with the clone feature, what is the process?

Quote:

---

Originally Posted by burris

If you hook up both ATAs and they are both provisioned to your main number along with the clone feature, what is the process?

---

Things are getting pretty hairy, I'd say!

Quote:

---

Originally Posted by burris

If you hook up both ATAs and they are both provisioned to your main number along with the clone feature, what is the process?

---

It should be fine actually. All should ring.