No devices registered in Vpanel

Although the HT502 worked O.K., The PAP2T just seems to be more solid.

To be fair, maybe the registration issues coincided with my assessment of the 502 at the time, but I will exchange them from time to time to offer some comparisons, if there are any practical differences.

Meanwhile, the service is rock solid and the WAF is 100% positive, and I can stand up straight again.;)

Quote:

---

Originally Posted by usa2k

Not to gloat, but mine have been flawless for a while now! (I love the GS HT502!)

---

FWIW, this is what I'm using :)

I just lost registration after 7 days. Vpanel says no registration. But the GS adapter says its registered. I started ethereal and put the ata on a hub. There was no data for 5-10 minutes from the ATA. It is supposed to send registration every minute. Just rebooted and its registered in the Vpanel and I can see SIP traffic on ethereal. I really think there is some problem with the new firmware.

I had DHCP before. I set static IP address for the ATA and will monitor to see how it works

Quote:

---

Originally Posted by sr98user

I just lost registration after 7 days. Vpanel says no registration. But the GS adapter says its registered. I started ethereal and put the ata on a hub. There was no data for 5-10 minutes from the ATA. It is supposed to send registration every minute. Just rebooted and its registered in the Vpanel and I can see SIP traffic on ethereal. I really think there is some problem with the new firmware.

I had DHCP before. I set static IP address for the ATA and will monitor to see how it works

---

Hmm, I've been up & running w/o problem for a number of days as well, but I checked just now and vPanel shows no device registered. Incoming calls go straight to voicemail. A PAP2T is supposed to be arriving soon, so perhaps that will address the problem.

I am having much better luck (staying registered) with the PAP2T vs the 502. Haven't dropped yet! (Hope I didn't just jinx myself ;) )

Quote:

---

Originally Posted by sr98user

I just lost registration after 7 days. Vpanel says no registration. But the GS adapter says its registered. I started ethereal and put the ata on a hub. There was no data for 5-10 minutes from the ATA. It is supposed to send registration every minute. Just rebooted and its registered in the Vpanel and I can see SIP traffic on ethereal. I really think there is some problem with the new firmware.

I had DHCP before. I set static IP address for the ATA and will monitor to see how it works

---

Out of curiosity, did your DHCP issue IPs for 7 days and maybe it renewed?

Quote:

---

Originally Posted by VOIPoTim

Out of curiosity, did your DHCP issue IPs for 7 days and maybe it renewed?

---

Actually, see this:

http://forums.voipo.com/showthread.php?t=1180

Quote:

---

Originally Posted by VOIPoTim

Actually, see this:

http://forums.voipo.com/showthread.php?t=1180

---

Reboot put me back online. Thx.

Quote:

---

Originally Posted by VOIPoTim

Out of curiosity, did your DHCP issue IPs for 7 days and maybe it renewed?

---

I have a static DHCP binding in my router for the ATA. My router says that the lease expiration is Infinite because of the static binding. But my default lease is 7 days for other devices. But the ATA has been up for more than 7 days, close to 8 days. Also, I am able to get to the WEB interface of the ATA. So it has an IP and and it is responding to HTTP requests.

I also noticed in my router logs that in the past 7 days the ATA port status went down/up about 3 times. Usually comes back within 10 seconds. I am not sure why the ATA is doing it. None of my other ports go down. But when I lost registration, the ports status was up.

I just got it again. No devices registered to the servers... I re-opened the ticket and hoping to get the GS swapped out for a Linksys... A reboot to the device corrected the problem.