*67 question

Quote:

---

Originally Posted by VOIPoBrandon

I noticed you mentioned that you are using a BYOD device, could you set your dial plan as follows:

Code:

---

( *123S0 | 123S0 | 011[2-9]x.S3 | 1[2-9]xx[2-9]xxxxxxS0 | [2-9]xx[2-9]xxxxxxS0 | [2-9]xxxxxxS3 | [2-9]11S0 | *xxS1 | *xx1[2-9]xx[2-9]xxxxxxS0 | *xx[2-9]xx[2-9]xxxxxxS0 | x. )

---

and see if that does not do the trick? Thanks!

---

It certainly did the trick...works perfectly...and I like that you kept the S0 in the string so there's no post dial delay.

Thanks....

burris

Are these * codes available for the GS286? If not now, will they be in the future?

I think I solved my problem...If I dial *67 with my wireless phone on port #1 the CID does NOT appear on my Cell.
If I use my corded phone on port#2 the CID APPEARS on my cell. I also have the new PAP2T ATA.

Quote:

---

Originally Posted by roehrle

I think I solved my problem...If I dial *67 with my wireless phone on port #1 the CID does NOT appear on my Cell.
If I use my corded phone on port#2 the CID APPEARS on my cell. I also have the new PAP2T ATA.

---

Have you tried each type of phone on each port?