Printable View
On some of my calls I am getting horrible static. I know it is digital, but it sounds like back in POTS days when water was in the line or a wire was loose. I just called my DID and I couldn't even make out the voice.
Edit: It happens on the ring-in, so when you call my DID you can hear the "static" even before someone answers.
Edit 2: It doesn't happen every time. Sometimes it is inbound and sometimes outbound. Kind of strange.
Local Sip port for FXS2 showed 5062. FXS1 shows 5079. Should I change them both?
Nope, they should be different ports for the different lines.Quote:
Originally Posted by Vumes
Try it now though, we just enabled both ports on our end so they should work.
My sip ports are
port1=5079
port2=5062
Been this way all along with no problems till yesterday's registration dropping out..
So far so good. Anyone else wanting to help test this...here is the info:
----
1) Login to ATA with admin password. Temporary: Ajw5q1FexW8u8XuL
2) Disable provisioning temporarily by removing the Config Server Path under Advanced Settings.
3) Under FSX Port 1, change your server to central02.voipwelcome.com
4) Under FSX Port 2, change your server to central02.voipwelcome.com AND add a B to the end of your username/auth username. Example: 2816172000 would change to 2816172000B
5) Reboot and see if you can find any issues.
After Testing/Reverting to Normal:
If you need to revert, just re-enable provisioning by changing Config Server Path back to provision.dev.voipo.com and rebooting. It should reconfigure as it was before.
----
Those are the default Local sip port settings for HT502 provisioned by VoiPo. I got mined changed to the HT502 factory default per belowQuote:
Originally Posted by burris
Port1=5060
Port2=5062
I've had my ports changed in the past and so long as they weren't the same, they workedQuote:
Originally Posted by myvoip07
What is everyone seeing so far?
There are dozens of you on it, so hopefully the bulk of you being quiet is a good thing :)
Tim, on FXS2 should my proxy server be central02 as well, or leave it as sip, or blank?
Should be central02.Quote:
Originally Posted by Vumes