No devices registered (502)

[1bird2]

Okay -- I have reluctantly moved the ATA outside of the router.

Current configuration:

Cable Modem <--> ATA <--> Router <--> Lan Devices

Still not working, as expected as I think there is something else going on with either the verision of old code that is on my ATA or a configuration issue on there end. Everthing was working until this weekend and I have not made any changes -- until I now moved the ATA to in front of the router.

I have a ticket open and hope to get this resolved soon. Good news is that the failover feature is working as my cell phone rings when someone calls my Voipo number.

-bird

[zevin]

I am also running into this with one of my 502's also. I had a heck of a time getting it to upgrade, now it's upgraded it will not register.

Looks like provisioning is not working or at least yesterday I was able to view the dat files for the 502 and the 286 in FireFox.

[hines86fan]

I'm still suffering from the inability to register after the upgrade. I moved the ATA in front of the router. Then tech support called, and we went through and verified the settings for firmware path and config path, and various other settings. But, alas, no joy was had.

[1bird2]

Based on most, if not all, of the posts -- I see that most are able to get the upgrade. My ATA will not even upgrade. In fact, the support guy I talked with today was suprised at the version of firmware I had, 1.0.0.76. I guess I have some really old version/device, which is weird as I really have not had any issues since getting the 502 ATA, until today of course.

I hope I am contacted soon to get this resolved.

-bird

[myvoip07]

Based on most, if not all, of the posts -- I see that most are able to get the upgrade. My ATA will not even upgrade. In fact, the support guy I talked with today was suprised at the version of firmware I had, 1.0.0.76. I guess I have some really old version/device, which is weird as I really have not had any issues since getting the 502 ATA, until today of course.

I hope I am contacted soon to get this resolved.

-bird

This is how it show after upgrade to 1.0.1.21. What does your shows?

Software Version: Program-- 1.0.1.21 Bootloader-- 1.0.0.9 Core-- 1.0.0.25 Base-- 1.0.0.76

Also i doubt there was 1.0.0.76 firmware version before as i couldn't find it. But i may be wrong.

[hines86fan]

This is how it show after upgrade to 1.0.1.21. What does your shows?

Software Version: Program-- 1.0.1.21 Bootloader-- 1.0.0.9 Core-- 1.0.0.25 Base-- 1.0.0.76

Also i doubt there was 1.0.0.76 firmware version before as i couldn't find it. But i may be wrong.

Same versions here.

[VOIPoTim]

For those of you having problems with this, make sure you have a ticket open so we can work through them with you.

[quattrohead]

My unit would not find the updated firmware until I changed the settings to use TFTP and Grandstreams IP.
We should probably have the correct info from VoIPO for future upgrades, unless they are going to use the factory standard firmware from now on.
Sounds like they should do as they seem to have a good working relationship with them and have pushed the firmware along in the right direction.

[1bird2]

Software Version: Program-- 1.0.0.76 Bootloader-- 1.0.0.9 Core-- 1.0.0.25 Base-- 1.0.0.76

Directly from the 502 interface.

[burris]

Software Version: Program-- 1.0.0.76 Bootloader-- 1.0.0.9 Core-- 1.0.0.25 Base-- 1.0.0.76

Directly from the 502 interface.

This is how mine looks...and it works well...

HT-502 V1.1B
Program-- 1.0.1.21
Bootloader-- 1.0.0.9
Core-- 1.0.0.25
Base-- 1.0.0.76