Something stuck? No Vpanel or inbound calls

**VOIPoBrandon** · 01-28-2009 09:05 PM

Originally Posted by Vumes

Tim, on FXS2 should my proxy server be central02 as well, or leave it as sip, or blank?

central02.voipwelcome.com

ah Tim beat me to it

.
________
Geo/chevrolet tracker

**Vumes** · 01-28-2009 09:18 PM

Ok, thats what I thought. I still have a no go. Want to take a look at my device? If it doesn't work out, i'll just revert back, but just wondering why it won't work out.

**scott2020** · 01-28-2009 09:19 PM

Everything looks OK except for the horrible static on my incoming calls. Maybe it is something with my DID or something.

**VOIPoBrandon** · 01-28-2009 09:23 PM

Originally Posted by Vumes

Ok, thats what I thought. I still have a no go. Want to take a look at my device? If it doesn't work out, i'll just revert back, but just wondering why it won't work out.

I saw both of your lines registered a second ago, any chance you have done some changes? Could you go ahead and power-cycle, the ATA while I'm grabbing a network trace on your account, thanks!

**Vumes** · 01-28-2009 09:27 PM

They were both registered because I reverted back and provisioned, then tried all over again. Power cycling now.

**myvoip07** · 01-28-2009 09:36 PM

My Incoming calls disconnect after 30 secs, Outgoing fine

**buckethead** · 01-28-2009 09:37 PM

After being able to get in and make the changes I seem to be staying connected now - System Up Time: 21:48:45 up 5 min - first time that has shown more than 0 all day. Incoming and outgoing calls seem to be working fine after a couple test calls.

**VOIPoBrandon** · 01-28-2009 09:44 PM

Originally Posted by Vumes

They were both registered because I reverted back and provisioned, then tried all over again. Power cycling now.

Odd, I was seeing them connected to the central02 server. Lets see how it goes this time.

**Xponder1** · 01-28-2009 09:52 PM

Correction I set mine as directed to test it and port 2 just gives me a fast busy. Both say they registered.

So how do we know when to change the provisioning back?

**VOIPoBrandon** · 01-28-2009 09:58 PM

Originally Posted by Xponder1

Correction I set mine as directed to test it and port 2 just gives me a fast busy. Both say they registered.

So how do we know when to change the provisioning back?

Could you PM me your phone number, if you want to check a few last settings to make sure it is alright, otherwise whenever you are ready to revert feel free.

Also, what action gives you fast busy? Incoming Call, outgoing Call? etc?
________
MONTANA MARIJUANA DISPENSARY