Something stuck? No Vpanel or inbound calls

[burris]

Burris, did you happen to have unregister on reboot enabled for both FXS1 and FXS2?

Brandon....

If you remember, when we turned up the clone feature, you specifically mentioned to have one of the 2 lines set to yes and the other to no.
I've had it this way all along, and until the problem a few days ago, everything worked perfectly.

As I mentioned, I'm still on Central02 and when I called home before, one of the 2 lines was set yes and one to no. I set both to yes and seems to be working ok.

[VOIPoTim]

Morning update. I still have my device configured as it was last night. Both incoming and outgoing calls are working fine. Vpanel shows only one device listed but someone just mentioned that at this time that is normal. I also noticed Vpanel is not logging calls but that does not surprise me.

Looks good.

One we enable the call logs for central02, it'll be fine. Just a display/permissions change.

[scott2020]

Right now my ATA information page says "NOT REGISTERED" and I go directly to voicemail. I am running the test config.

[KenH]

1:18 PM EST

HT502: Neither port registered and vPanel: No devices registered

Still in test configuration.

[scott2020]

My status shows registered again now. Maybe an intermittent problem or something on the new server? At least the ATA re-registered itself but my inbound calls were still down 15-30 minutes or so.

[Vumes]

Are you sure you do not have voice mail? That would make both lights blink.

You learn something new everyday. I do indeed have voicemail. I deleted them and the lights went off. Sheesh. Thanks.

[VOIPoTim]

I think Ken and Scott just helped us discover something very key here that's been completely overlooked.

More testing to confirm then we'll post. Thank You!

[scott2020]

Sweet! Glad to hear!

[KenH]

2:56 PM EST

HT502: FXS1 Registered, FXS2: Not Registered
vPanel: No devices registered

Should I reboot?

Edit:
3:26 PM - Rebooted. HT502: Both ports registered. VPanel: one registered device.

[VOIPoTim]

2:56 PM EST

HT502: FXS1 Registered, FXS2: Not Registered
vPanel: No devices registered

Should I reboot?

Yes. I believe this will be the last time.