Something stuck? No Vpanel or inbound calls

[buckethead]

After being able to get in and make the changes I seem to be staying connected now - System Up Time: 21:48:45 up 5 min - first time that has shown more than 0 all day. Incoming and outgoing calls seem to be working fine after a couple test calls.

[Xponder1]

Correction I set mine as directed to test it and port 2 just gives me a fast busy. Both say they registered.

So how do we know when to change the provisioning back?

[VOIPoBrandon]

Correction I set mine as directed to test it and port 2 just gives me a fast busy. Both say they registered.

So how do we know when to change the provisioning back?

Could you PM me your phone number, if you want to check a few last settings to make sure it is alright, otherwise whenever you are ready to revert feel free.

Also, what action gives you fast busy? Incoming Call, outgoing Call? etc?
________
MONTANA MARIJUANA DISPENSARY

[Xponder1]

Sent. Port 1 I tested in and out both for 2 mins and they were fine.

[Xponder1]

Could you PM me your phone number, if you want to check a few last settings to make sure it is alright, otherwise whenever you are ready to revert feel free.

Also, what action gives you fast busy? Incoming Call, outgoing Call? etc?

Outbound calls and inbound did not work to the second port.

I tested by calling my cell phone then using my wifes phone to call the house.

[VOIPoTim]

Outbound calls and inbound did not work to the second port.

I tested by calling my cell phone then using my wifes phone to call the house.

Was port 2 set to central02 too?

[Xponder1]

Was port 2 set to central02 too?

Yes I just checked and made sure.

[scott2020]

I also get fast busy with outgoing calls on port 2.

EDIT: When I dial 11 digits it works. Dialing 7 digits on port 2 gives fast busy.