No devices registered in Vpanel

[Xponder1]

I looked up the post Tim made back a couple months ago or so, when they were doing the office cleanup sale. The link still works, and he was clearing them out for $25, but I was wondering if that was long over. I am guessing Tim had to use them up by now! If not, I'd like to grab one up. I should have jumped when I had the chance!

That is half the retail price if its the same one I looked up.

[Xponder1]

I do not know if this is a "known issue" but again this morning 2-7-09 when my wife tried to call she had a problem. Would have been about 6:30am CST. It said my line was disconnected. Did not go to fail over but instead gave her a message saying my line is disconnected.

When I woke up at 7:30 and had not heard from her I tried calling out and it was fine. Call logs for today show my one call out. I assumed she just forgot to call. She just called from work and told me about the problem and I wanted you to know. Seems its ok now.

I know some others here have devices that show disconnects so perhaps they can post if theirs was not working during that time and how long it was out.

Thanks,

[eagle 1]

My device also show unregistered and no devices on vPanel. Had to Reboot to get devices registered. They were working around 8 am est, and then i checked aroung 11:20 am est and they were not registered. Rebooted Ht502 and everything back

Also on Fxs Port 1 it show YES on UnRegister on Reboot, but Fxs Port 2 shows NO on Unregister on Reboot

Update:: 11:40 am est
I guess I spoke too soon, they are fluctuating between registered and not registered..it looks to be re-registering every minute...Sometimes successfully and sometimes not! Sometimes only 1 port gets registered

[Xponder1]

My device also show unregistered and no devices on vPanel. Had to Reboot to get devices registered. They were working around 8 am est, and then i checked aroung 11:20 am est and they were not registered. Rebooted Ht502 and everything back

Also on Fxs Port 1 it show YES on UnRegister on Reboot, but Fxs Port 2 shows NO on Unregister on Reboot

Update:: 11:40 am est
I guess I spoke too soon, they are fluctuating between registered and not registered..it looks to be re-registering every minutes...Sometimes successfully and sometimes not! Sometimes only 1 port gets registered

That makes since actually they have them set to reregister every minute as a fix for some bug.

[Xponder1]

Seems support is looking in to it now. I just got a reply to my ticket.

[eagle 1]

Also on Fxs Port 1 it show YES on UnRegister on Reboot, but Fxs Port 2 shows NO on Unregister on Reboot

Update:: 11:40 am est
I guess I spoke too soon, they are fluctuating between registered and not registered..it looks to be re-registering every minute...Sometimes successfully and sometimes not! Sometimes only 1 port gets registered

Just seems odd that the two ports are set different for UnRegistering

Another Update:

And calls are going directly to VoiceMail...My Trial does not seem to be working very favorably this week! I am glad I didn't use my main line to switch over, my wife would have killed me.

[burris]

Just seems odd that the two ports are set different for UnRegistering

I think it was that way when the clone feature came about, but now they are both set to unregister...via provisioning..

[eagle 1]

My device also show unregistered and no devices on vPanel. Had to Reboot to get devices registered. They were working around 8 am est, and then i checked aroung 11:20 am est and they were not registered. Rebooted Ht502 and everything back

Also on Fxs Port 1 it show YES on UnRegister on Reboot, but Fxs Port 2 shows NO on Unregister on Reboot

Update:: 11:40 am est
I guess I spoke too soon, they are fluctuating between registered and not registered..it looks to be re-registering every minute...Sometimes successfully and sometimes not! Sometimes only 1 port gets registered

For what its worth, I moved my device back behind my firewall and its a little better. I also noticed that that Ip was getting hammered by three different Ip addresses (Thousands of times per hour).

I set the firewall to only allow the specific ports and Ipaddress specified by support and it seems better.

the offending ip's were:

Name: pbx-vancouver1.mdci.ca
Address: 204.209.14.50

Name: s0106001ee5355afc.ss.shawcable.net
Address: 70.64.23.199

Name: 209-20-73-234.slicehost.net
Address: 209.20.73.234

[VOIPoTim]

For what its worth, I moved my device back behind my firewall and its a little better. I also noticed that that Ip was getting hammered by three different Ip addresses (Thousands of times per hour).

I set the firewall to only allow the specific ports and Ipaddress specified by support and it seems better.

the offending ip's were:

Name: pbx-vancouver1.mdci.ca
Address: 204.209.14.50

Name: s0106001ee5355afc.ss.shawcable.net
Address: 70.64.23.199

Name: 209-20-73-234.slicehost.net
Address: 209.20.73.234

Yeah none of those IPs are related to us so definitely block them.

[Xponder1]

For what its worth, I moved my device back behind my firewall and its a little better. I also noticed that that Ip was getting hammered by three different Ip addresses (Thousands of times per hour).

I set the firewall to only allow the specific ports and Ipaddress specified by support and it seems better.

the offending ip's were:

Name: pbx-vancouver1.mdci.ca
Address: 204.209.14.50

http://www.iptools.com/dnstools.php?....234&submit=Go


Name: s0106001ee5355afc.ss.shawcable.net
Address: 70.64.23.199
http://70.64.23.199/ error seems to indicate its a open proxy
http://www.iptools.com/dnstools.php?....199&submit=Go


Name: 209-20-73-234.slicehost.net
Address: 209.20.73.234
http://209.20.73.234/ Looks like the first one
http://www.iptools.com/dnstools.php?....234&submit=Go

Could always contact them and ask them nicely to leave your ip alone.