Like the subject says - do you have a 10+ second delay when dialing a 7 digit telephone number?
Yes, and I use a HT-502
Yes, and I use a PAP2T
No, and I use a HT-502
No, and I use a PAP2T
Like the subject says - do you have a 10+ second delay when dialing a 7 digit telephone number?
Just tried. PAP2T - 28 seconds. Second try was 33 seconds.
Last edited by abward; 03-04-2009 at 08:02 AM.
Got a delay? Please send support@voipo.com a traceroute to your SIP server.
Possibly a dial string issue for those who are having this problem.
VOIPoDylan,
Will do. How do I determine what my SIP server is? I looked in vPanel and on the PAP2T and do not see anything.
Ticket JMW-878775
I used to have an issue, but not anymore. I have a 502.
Totally a 7 digit dialing issue. Workaround for me was (as I worked with the voipo team months ago to get resolved) to dial the 7 digits, then #. Call goes right through. Using GS 502, NATed behind WRT54g w/ Tomato 1.23.
Best Voip quality service I have ever seen -- last 5 weeks have been tough though.
-bird
This is one feature I like with the grandstreams: if the SIP server supports 484 responses ("Incomplete Address"), the grandstream can be set to use the Early Dial feature, whereby every digit pressed results in sending an invite to the SIP server with the number collected so far. If the SIP server sends back a 484, the GS will keep collecting digits until it gets a success or failure response. This is nice since it doesn't require dialplan juju in the ATA and dialing 7 digits works instantly I have my asterisk server set up this way.
Bookmarks