No inbound Service - Maintenance Related?

[stenger]

Anyone else down this morning? Service was fine when I went to bed last night. Now the caller just gets dead air with no ringing and eventually gets voicemail. I get the phone ring but no one is on the line. Also no calls are being logged on the Vpanel. Is this related to the Maintenance last night? All my ports are forwarded correctly. In fact no changes to my setup in months.

Darn Peculiar...Reset the adapter for the upteenth time and now my inbound call worked but still no call logs.

[KenH]

Anyone else down this morning? Service was fine when I went to bed last night. Now the caller just gets dead air with no ringing and eventually gets voicemail. I get the phone ring but no one is on the line. Also no calls are being logged on the Vpanel. Is this related to the Maintenance last night? All my ports are forwarded correctly. In fact no changes to my setup in months.

Darn Peculiar...Reset the adapter for the upteenth time and now my inbound call worked but still no call logs.

I had a problem with dead air on an incoming call at 9:52 AM EDST. ATA unregistered.

Rebooting router & ATA did not correct.

ATA was set to east01. Changed to central01 and ATA registered. Back to normal now.

[sr98user]

I just lost registration. Error on the config page is "Can't connect to login server". I am on east01.voipwelcome.com. But right now, they have the IP address instead of the name in the configuration. I can ping the IP address 208.43.68.151. BTW, my PAP2 has a n uptime of 11 hours and I did not reboot it.

[dswartz]

Down here too. Asterisk is showing 'registration sent' and the vpanel shows a valid registration. I noted another oddity last night - I called 411 and got:

"Got SIP response 603 "Decline - Invalid Phone Number" back from 208.43.97.218" I did not try again, since I got busy with something else. Ticket time I guess.

[sr98user]

It just reconnected for me.

[dswartz]

I bounced my server and everything came back

[rjbasye]

Mine just came back up after getting the can't login to server error. Vpanel doesn't show what server I'm connected to.

[dswartz]

Mine just came back up after getting the can't login to server error. Vpanel doesn't show what server I'm connected to.

I see the same thing: "you are currently registered to" with nothing.

[fisamo]

I have finally implemented a monitoring script on my Voipo trunk, and it showed the trunk to be down between 1-3AM today (I assume the maint window), and again from about 10am - 10:35am this morning. I register to east01, and my script monitor runs every 5 minutes (on the 5's and 0's). If it goes up and down between those times, my script won't detect it (because I don't need it running all the time and don't need 60 emails/hr if I do something silly that causes a failure). I haven't gotten a 'down' notice since 10:35 this morning.

[dswartz]

could you share the script, please? having something like that just moved up on my list of priorities, and while i know i can code this, i'd rather not reinvent the wheel thanks!