Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Firewall issues

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jul 2009
    Posts
    5

    Default Firewall issues

    I had an issue yesterday when my PAPT2 failed to reregister after I rebooted my router. I submitted a ticket, the response was prompt, and they enabled a STUN server and set NAT keep-alive packets to be sent every 5 minutes to help prevent the problem from happening again. They also recommended that I disable the SPI firewall on my router because it may cause intermittent problems, even if it seems to be working.

    I rebooted the router again today, and when the PAPT2 again failed to register (with the SPI firewall still on), I experimented a bit with putting the PAPT2 in a DMZ vs. turning off the firewall completely. As far as I could tell, the DMZ did not let it reregister, but shutting the firewall off did.

    I'm not crazy about leaving the firewall off, but I suppose I could use an iptables-based firewall instead of the SPI firewall (I am using DD-WRT firmware). I'm just wondering if others out there have thoughts & experience on the pros & cons of an SPI firewall and other router security measures while using VOIP.

    Thanks.

  2. #2
    Join Date
    Feb 2007
    Posts
    801

    Default Re: Firewall issues

    Which version of DD-WRT are you running?

  3. #3
    Join Date
    Jul 2009
    Posts
    5

    Default Re: Firewall issues

    Which version of DD-WRT are you running?
    v24-sp2 standard, build 12188 (05/21/09).

  4. #4
    Join Date
    Dec 2008
    Location
    Tulsa, Oklahoma
    Posts
    538

    Default Re: Firewall issues

    Firmware: DD-WRT v24-sp2 (01/01/09) micro
    I use this version with no problems at all. It was one of the most recommended builds.

  5. #5
    Join Date
    Jul 2009
    Posts
    5

    Default Re: Firewall issues

    Quote Originally Posted by Xponder1 View Post
    Firmware: DD-WRT v24-sp2 (01/01/09) micro
    I use this version with no problems at all. It was one of the most recommended builds.
    And you leave the SPI firewall on?

    I've had no trouble with the router for anything else, just an intermittent registration issue in the last couple days while the firewall is on.

  6. #6
    Join Date
    Feb 2007
    Posts
    150

    Default Re: Firewall issues

    I have a similar configuration and leave the SPI firewall off. It has not created extra issues with my other laptops, PC's etc from a security aspect.

  7. #7
    Join Date
    Jan 2009
    Posts
    230

    Default Re: Firewall issues

    Curious - correctly setting up a DMZ should bypass your router firewall altogether.

  8. #8
    Join Date
    Dec 2008
    Location
    Tulsa, Oklahoma
    Posts
    538

    Default Re: Firewall issues

    Quote Originally Posted by olaf View Post
    And you leave the SPI firewall on?

    I've had no trouble with the router for anything else, just an intermittent registration issue in the last couple days while the firewall is on.
    Yes I leave it on.

  9. #9
    Join Date
    Sep 2008
    Location
    Southwest MO
    Posts
    219

    Default Re: Firewall issues

    Quote Originally Posted by Xponder1 View Post
    Firmware: DD-WRT v24-sp2 (01/01/09) micro
    I use this version with no problems at all. It was one of the most recommended builds.
    I think the newest release was to address an exploit that would give hackers full control of the router. I saw a news release about it yesterday.

  10. #10
    Join Date
    Feb 2007
    Posts
    801

    Default Re: Firewall issues

    Quote Originally Posted by scott2020 View Post
    I think the newest release was to address an exploit that would give hackers full control of the router. I saw a news release about it yesterday.
    That's comforting...

    I asked the OP about version, because I have SPI on with no issues whatsoever. One key difference, though, is that as a former beta tester, I'm able (and choosing) to connect with my own equipment (PBX-in-a-Flash), not a Voipo-supplied ATA. My DD-wrt version is shown below:

    Code:
    Router Model         Asus WL-520GU/GC
    Firmware Version     DD-WRT v24-sp2 (06/09/09) mini-usb - build 12268M NEWD Eko
    I don't know as if the hardware would make a difference, but what brand and model router are you running?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •