PAP2T vs RT31P2

[ctaranto]

If you need to forward ports you'd you'll be forwarding from the WRT to whatever address the WRT has assigned the RT (i.e. the RT's WAN address). Also see my previous post.

Under voip123's recommendation, I statically set the WAN side of the RT to 172.20.0.118, so I forwarded that IP in the WRT.

I still don't have Phone 1 lit up. I filed a support ticket last night about this but haven't heard back. Maybe support doesn't work on the weekends?

Thanks again...

-Craig

[Russell]

Under voip123's recommendation, I statically set the WAN side of the RT to 172.20.0.118, so I forwarded that IP in the WRT.

I still don't have Phone 1 lit up. I filed a support ticket last night about this but haven't heard back. Maybe support doesn't work on the weekends?

Thanks again...

-Craig

To be honest, I've don't remember all the details and what you've tried from your postings in this long thread.

If get your RT to obtain an IP address automatically and directly attach it to the cable modem does Line 1 light up? If yes, I'd say the problem is at your end; if no, it's possibly not at your end.