My 7960 config files. Don't know if it works for 7940

SIPDefault.cnf
# sip default configuration file
# Image Version for upgrade
;image_version: P0S3-8-12-00 ;
;image_version: P0S3-08-6-00 ;
;image_version: P0S3-07-5-00 ;
# Proxy server address
# Proxy Registration (0-disable (default), 1-enable)
proxy_register: 1

proxy1_address: "sip.voipwelcome.com" ; Can be dotted IP or FQDN
proxy2_address: "sipsorcery.com" ; Can be dotted IP or FQDN
proxy3_address: "orbtalk.co.uk" ; Can be dotted IP or FQDN
proxy4_address: "outgoing.future-nine.com" ; Can be dotted IP or FQDN
proxy5_address: "callcentric.com" ; Can be dotted IP or FQDN
proxy6_address: "proxy01.sipphone.com" ; Can be dotted IP or FQDN

# Phone Registration Expiration [1-3932100 sec] (Default - 3600)
timer_register_expires: 600
# Codec for media stream (g711ulaw (default), g711alaw, g729a)
preferred_codec: g711ulaw
# TOS bits in media stream [0-5] (Default - 5) ?changed to dscp
# tos_media: 5
dscpForAudio: 184
# Inband DTMF Settings (0-disable, 1-enable (default))
dtmf_inband: 1
# Out of band DTMF Settings (none-disable, avt-avt enable (default), avt_always - always avt )
dtmf_outofband: avt
# DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal (default), 4-3db up, 5-6dB up)
dtmf_db_level: 3
# SIP Timers
timer_t1: 500 ; Default 500 msec
timer_t2: 4000 ; Default 4 sec
sip_retx: 10 ; Default 10
sip_invite_retx: 6 ; Default 6
timer_invite_expires: 180 ; Default 180 sec
# Dialplan template (.xml format file relative to the TFTP root directory)
dial_template: dialplan
# TFTP Phone Specific Configuration File Directory
tftp_cfg_dir: "" ; Example: ./sip_phone/
# Time Server (There are multiple values and configurations refer to Admin Guide for Specifics)
# sntp_server: "194.81.227.227" ; SNTP Server IP Address (this is ntp1.ja.net)
sntp_server: "17.254.0.49" ; SNTP Server IP Address (this is ntp2.usno.navy.mil)
sntp_mode: directedbroadcast ; unicast, multicast, anycast, or directedbroadcast (default)
time_zone: EST ; Time Zone Phone is in
dst_offset: 1 ; Offset from Phone's time when DST is in effect
dst_start_month: "March" ; Month in which DST starts
dst_start_day: 0 ; Day of month in which DST starts
dst_start_day_of_week: "Sun" ; Day of week in which DST starts
dst_start_week_of_month: 2 ; Week of month in which DST starts
dst_start_time: 02 ; Time of day in which DST starts
dst_stop_month: "Nov" ; Month in which DST stops
dst_stop_day: 0 ; Day of month in which DST stops
dst_stop_day_of_week: "Sun" ; Day of week in which DST stops
dst_stop_week_of_month: 1 ; Week of month in which DST stops 8=last week of month
dst_stop_time: 2 ; Time of day in which DST stops
dst_auto_adjust: 1 ; Enable(1-Default)/Disable(0) DST automatic adjustment
time_format_24hr: 0 ; Enable(1 - 24Hr Default)/Disable(0 - 12Hr)
dnd_control: 0 ; Default 0 (Do Not Disturb feature is off)
callerid_blocking: 0 ; Default 0 (Disable sending all calls as anonymous)
anonymous_call_block: 0 ; Default 0 (Disable blocking of anonymous calls)
dtmf_avt_payload: 101 ; Default 101
# Sync value of the phone used for remote reset
sync: 1 ; Default 1
proxy_backup: "" ; Dotted IP of Backup Proxy
proxy_backup_port: 5060 ; Backup Proxy port (default is 5060)
proxy_emergency: "" ; Dotted IP of Emergency Proxy
proxy_emergency_port: 5060 ; Emergency Proxy port (default is 5060)
# Configurable VAD option
enable_vad: 0 ; VAD setting 0-disable (Default), 1-enable
nat_enable: 1 ; 0-Disabled (default), 1-Enabled
nat_address: 192.168.9.1 ; WAN IP address of NAT box (dotted IP or DNS A record only)
voip_control_port: 5060 ; UDP port used for SIP messages (default - 5060)
start_media_port: 16384 ; Start RTP range for media (default - 16384)
end_media_port: 32766 ; End RTP range for media (default - 32766)
nat_received_processing: 1 ; 0-Disabled (default), 1-Enabled
# outbound_proxy: "206.165.50.116" ; restricted to dotted IP or DNS A record only (this is fwdnat.pulver.com)
outbound_proxy_port: 5060 ; default is 5060
# Allow for the bridge on a 3way call to join remaining parties upon hangup
cnf_join_enable : 1 ; 0-Disabled, 1-Enabled (default)
# Allow Transfer to be completed while target phone is still ringing
semi_attended_transfer: 1 ; 0-Disabled, 1-Enabled (default)
# Telnet Level (enable or disable the ability to telnet into the phone)
telnet_level: 2 ; 0-Disabled (default), 1-Enabled, 2-Privileged
# XML URLs
services_url: "http://phone-xml.berbee.com/menu.xml" ; URL for external Phone Services
# services_url: "http://www.ip-phone-services.com/bt/" ;bt services
# services_url: "http://your.site/services.xml" ; URL for external Phone Services
# services_url: "http://193.113.58.136/bt/" ;bt services

directory_url: "http://your.site/directory.xml" ; URL for external Directory location
logo_url: "http://hostsvg.com/logo.bmp" ; URL for branding logo to be used on phone display
# logo_url: "http://kermit/asterisk-tux.bmp"
# HTTP Proxy Support
http_proxy_addr: "" ; Address of HTTP Proxy server
http_proxy_port: 80 ; Port of HTTP Proxy Server (80-default)
# Dynamic DNS/TFTP Support
dyn_dns_addr_1: "" ; restricted to dotted IP
dyn_dns_addr_2: "" ; restricted to dotted IP
dyn_tftp_addr: "" ; restricted to dotted IP
# Remote Party ID
remote_party_id: 1 ; 0-Disabled (default), 1-Enabled
# Call Hold Ringback (0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user control)
call_hold_ringback: 1 ; Default 0 (Disable ringback of held call)

SIPmacaddress.cnf
# phone-specific configuration file sample
line1_name : VOIPo
line1_authname : "xxx"
line1_password : "password"
line1_shortname : "Line 1"
line1_displayname : "VOIPo"
proxy1_address: "sipsorcery.com" ; Can be dotted IP or FQDN
proxy1_port: 5070

line2_name : Sipsorcery
line2_authname : "xxx"
line2_password : "password"
line2_shortname : "Line 2"
line2_displayname : "Sipsorcery"
proxy2_address: "sipsorcery.com" ; Can be dotted IP or FQDN
proxy2_port: 5080

line3_name: Orbtalk
line3_authname: "xxx"
line3_password: "password"
line3_shortname : "Orbtalk"
line3_displayname : "Line 3"
proxy3_address: "orbtalk.co.uk" ; Can be dotted IP or FQDN
proxy3_port: 5065

line4_name: F9
line4_authname: "xxx"
line4_password: "password"
line4_shortname : "Line 4"
line4_displayname : "F-Nine"
proxy4_address: "outgoing.future-nine.com" ; Can be dotted IP or FQDN
proxy4_port: 5062

line5_name: CallCentric
line5_authname: "xxx"
line5_password: "password"
line5_shortname : "Line 5"
line5_displayname : "CallCentric"
proxy5_address: "callcentric.com" ; Can be dotted IP or FQDN
proxy5_port: 5060

line6_name: Gizmo5
line6_authname: "xxx"
line6_password: "password"
line6_shortname : "Line 6"
line6_displayname : "Gizmo 5"
proxy6_address: "proxy01.sipphone.com" ; Can be dotted IP or FQDN
proxy6_port: 5061

####### New Parameters added in Release 2.0 #######
# Phone Label (Text desired to be displayed in upper right corner)
phone_label: "VoIP/Sorcery " ; Has no effect on SIP messaging
# Line 1 Display Name (Display name to use for SIP messaging)
line1_displayname: "VOIPo"
line2_displayname: "Sipsorcery"
line3_displayname: "Ortalk"
line4_displayname: "F-Nine"
line5_displayname: "CallCentric"
line6_displayname: "Gizmo5"

####### New Parameters added in Release 3.0 ######
# Phone Prompt (The prompt that will be displayed on console and telnet)
phone_prompt: "SIP_7960: " ; Limited to 15 characters (Default - SIP Phone)

# Phone Password (Password to be used for console or telnet login)
phone_password: "cisco" ; Limited to 31 characters (Default - cisco)

# User classifcation used when Registering [ none(default), phone, ip ]
user_info: none