Quote Originally Posted by ctaranto View Post
What firmware are you running on the WRT54GS?

I know it might be a pain, but did you try hooking things as described in my post? I'd be curious if that resolved your issue.
I have a WRT54G2 running dd-wrt, and I have had this issue when the TA was on either side of it. For no reason, the lights will go out for Lines 1 & 2, and I have no dialtone. If the TA is plugged into the cable modem, and the WRT54G2 on the other side, if I have no lights on line 1 & 2, I have no internet access on any of my computers. When I put the TA off the WRT54G2, when it dies, it only takes down the phones as nothing is down line of it.

VoIPo has replaced the TA, and it has made no difference. I did notice their was a later firmware for the TA, and asked VoIPo about it, but they did not thing that would resolve the issue. It seems to be something in the TA that is having the problems.

Right now, I have the TA off the WRT54G2, in the DMZ, ports forwarded, on a static IP address (NAT). Like I have said, it will work fine, then all of a sudden, no Line 1/Line 2 lights and no dialtone.

My wife could care less who we use, as long as "There is dialtone when she picks it up, and people can call us." VoIPo is not making my choice to move to them easy on either one of those points.