Want a feedback please!!!

[dteague]

So how does your service get restored when this happens. Do you power-cycle the ATA?

Yes, As soon as I power-cycle the RT31P2 and it "boots", I have dialtone and I can make/receive calls.

[ctaranto]

dteague,

If you're willing to experiment, would you be willing to hook things up the way I described in the thread http://forums.voipo.com/showthread.php?t=1919 ?

I'd like for someone else to try it out to see if my case was just pure luck, or is there something "special" about bypassing the direct LAN to WAN connection from the WRT to RT.

/c

[dteague]

If you're willing to experiment, would you be willing to hook things up the way I described in the thread http://forums.voipo.com/showthread.php?t=1919 ?

I'd like for someone else to try it out to see if my case was just pure luck, or is there something "special" about bypassing the direct LAN to WAN connection from the WRT to RT.

I will try it and see if it makes any difference. I used to do networking for a living, and just having a hard time wrapping my head around how this will solve anything as it seems to be adding a hop to all transmissions (abit it an out of the WAN to the LAN port on the RT31P2 and then to the WRT54G2... But stranger things have happened... If it does work, then I start thinking more twords it being a firmware issue on RT31P2.