How many line phones do you have?

[babaganoosh]

thanks, but I have 2 boxes (with a total of 4 jacks) for the 2 numbers on 2 different accounts. So I have 4 lines (2 cloned & 2 phone numbers). I was thinking he had the same.

[lost_]

Two VOIPo numbers on a 2-line Philips SE6591 DECT cordless system with 4 handsets + speakerphone base (a good deal for $160)

[caseydoug]

All the wired jacks in my house support two lines (inside and outside pairs) which home run to my wiring closet. Thus each jack supports either two single-line phones or one two-line phone, and I have both types. In addition, I have a two-line cordless system with around six two-line handsets.

I upgraded the cloned line from VOIPo, so the two lines are independent. A single PAP2 connected to the wiring closet drives all of it. The base station of the cordless system is simply connected to one of the wired jacks. Most of the phones are pretty old, but everything seems to work.

[MisterEd]

Ed: So you really have access to 4 phone lines, right (the 2 numbers on the 2 accounts AND the 2 cloned lines).

So are you not using the 2 cloned lines? Just a 2 line phone, with each line handling 1 phone line / voipo account?
when you are on line 1 and someone calls it, you get caller ID tone, right?

thanks!

No, I have one PAP2 with 2 separate fully independent phone numbers (just like CASEYDOUG above). You can do this for free (well, you need to buy a virtual number) then go into vPanel, BETA and use the "2nd Line" feature). For the additional cost of a virtual number ($24/yr) you will have 2 independent lines. That's the best bargain there is from Voipo other then their standard rates.