Results 1 to 2 of 2

Thread: Softphone/BYOD Basic Questions

  1. #1
    Join Date
    Jun 2011
    Posts
    2

    Default Softphone/BYOD Basic Questions

    OK - so, I'm REALLY new to SIP and all the VOIP stuff; so here's some newbie questions:

    I downloaded, registered, and set up the Cloud Softphone for my iPhone. Then, a call came in and it rang ONLY on my softphone, NOT on the devices attached to the VOIPO ATA. Is that "expected" behavior? If my wife had installed the Cloud Softphone on HER iPhone, would they BOTH ring, or just one? Is there a way I can have a "combination" of BYOD AND the Grandstream ATA (so that all of the phones will ring).

    I'm looking at getting some sort of DECT setup (Grandstream 715 or Panasonic TGP 500) and EVENTUALLY running Asterisk on a BeagleBone SBC; but this kinda confused me.

    Can someone recommend a "VOIP for Dummies" or equivalent?

    Thanks in advance!

    Clay Jackson
    clayj

  2. #2
    Join Date
    Feb 2007
    Location
    Kitsap County, WA.
    Posts
    734

    Default Re: Softphone/BYOD Basic Questions

    if all 3 of your devices have different public IP addresses, in other words- your phones are not connected to your wifi but are using their cellular network- then yes they should all three ring.

    Ive always had trouble trying to use more than one device on the same internet connection with the same incoming number. But then again I did not go very far into experimentation with port settings en such...

    Im sure it can be made to work but can't say myself yet how.
    I Void Warranties.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •