Hi All -

Currently using a CISCO UC320W system at the house with two full accounts from VOIPO and have a couple of questions that I hoping someone can assist.

I know all of the normal items such as User ID, server / host name, etc. but I've got some extra fields for which I'm not suure how or if they are needed.
  • I've got a section labeled "SRV Record" which has two options,
    • 1) SRV Record Lookup (can be checked or unchecked) and
    • 2) SRV Auto Prefix (also can be checked or unchecked)
  • Second Section is labeled "NAT" which has two options,
    • 1) NAT Mapping (can be checked or unchecked) and
    • 2) Send NAT Keep Alive (can be checked or unchecked)
  • Lastly a section which is not Specific to VOIPO but any and ALL SIP providers setup on the system labeled "Systemwide SIP Parameters"
    • 1) NAT STUN Server (for which I've populated with "zeus.voipwelcome.com") and
    • 2) "Static Address for Site" for which I've left blank.

Again if anyone has any suggested settings for these it would be appreciated. My Cisco UC320W IS behind a Time Warner Combo Modem / Router and DOES have ports forwarded to the CISCO Box.

Thanks very much
Dean T Rose
Dallas, TX