Voicemail Down or being upgraded?

**NY Tel Guy** · 09-25-2008 11:10 AM

Originally Posted by VOIPoRay

dial ***, when asked to enter an option, press 02. The device should then tell you the ip address that (if any) it's using.

if you have the device and a pc hooked up to the same router (or hub) then you can enter the ip address in the browser of your pc (i.e. http://192.168.1.4) and login there to change the necessary options.

Ok I figured out the IP address from the 7 entries in my router and got to the login page.
All I need now is the password.

Thanks Chpalmer and Ray.

**NY Tel Guy** · 09-25-2008 01:04 PM

Ok just for fun, I have gone totally shameless and added a profile picture and an album, showing the rapid deterioration we all live through.....

**burris** · 09-25-2008 01:13 PM

Originally Posted by NY Tel Guy

Ok just for fun, I have gone totally shameless and added a profile picture and an album, showing the rapid deterioration we all live through.....

Shameless, indeed..

**NY Tel Guy** · 09-25-2008 01:21 PM

Originally Posted by burris

Shameless, indeed..

what is a shame that my damn hair fell out so early.

Then the bags under my eyes and it's like a roller coaster that stops going up and only goes down...lol

**VOIPoTim** · 09-25-2008 01:24 PM

Originally Posted by NY Tel Guy

what is a shame that my damn hair fell out so early.

Then the bags under my eyes and it's like a roller coaster that stops going up and only goes down...lol

Was it mostly in the last year or so while you were a VT customer?

I mean let's give credit where credit is due.

**quattrohead** · 09-25-2008 01:44 PM

I appear to be in the list, have IP and login screen, just need the password.

**NY Tel Guy** · 09-25-2008 02:03 PM

Originally Posted by VOIPoTim

Was it mostly in the last year or so while you were a VT customer?

I mean let's give credit where credit is due.

Yes, the one where I have all my hair was January 06 and then current one is after I tried to unsuccessfully to complete 3 calls in a row on VT.

**varaonaid** · 09-25-2008 02:16 PM

Hey there,

Just curious, should the 123 work now for checking VM? It's isn't working for me. I was getting a stutter tone and flashing on the Grandstream but rebooted it when the 123 wasn't working and when I realized that the VM service was being upgraded. The stutter tone and flashing light weren't working when it rebooted (even though I have new VM) and 123 didn't either. Dialing the 832-878-7000 does work to access it. Also strange, when I dialed either my own VOIPo number (from my VOIPo phone) or 123, it goes to my failover number rather than to VM. I have call forwarding completely disabled so it has to be going via the failover which I don't understand since the VOIPo number (other than the few VM glitches listed above) is working perfectly.

Any thoughts?

Thanks!
Rae

**usa2k** · 09-25-2008 03:56 PM

| 734-437-XXXX | zeus.voipwelcome.com |

Well ... I thought the GS was under VOIPo control?
I changed it to "welcome" and it seemed to stick.

The GS immediately gets the green flash on the GS.
No MWI though.
Definitely a Stutter Tone.

And now about 90 seconds later, MWI showed up.
Thank you!

Is there something VOIPo needs to do to ensure it is managed by VOIPo?
Time is 4 hours ahead of my EST time right now.

**VOIPoTim** · 09-25-2008 04:03 PM

Originally Posted by usa2k

Is there something VOIPo needs to do to ensure it is managed by VOIPo?
Time is 4 hours ahead of my EST time right now.

It needs to have the "Config Server Path" set to provision.voipo.com and the MAC in our system.

I know some of the very very early ones were never setup like that and put in the system so that's why some lingering ones weren't/aren't being updated.