Quote Originally Posted by 1bird2 View Post
Setting a static IP does not seem to work for me.

I log in as Tim mentions. Set IP address to a private IP in my network (NAT'd behind a FW), set subnet, default route and add two public DNS server addresses (my ISP DNS servers)

I update this info, select "Update". Message returned that values are saved, reboot to take affect. I reboot device remotely. Wait 30 secs and login again.

THe static IP is set (as I login with the new IP address in the browser), but the DNS entries are gone and all set to 0.0.0.0. I also notice I have lost dial tone and LED on GS is now flashing on / off with red color.

Log back in to GS. Reset to Dynamic (note, I have reserved an IP for the GS by MAC address), save configuration, reboot GS. Everything works after I do this (i.e. get dial tone, can make call, phone rings when I call a Virtual number I have assinged to the GS -- as I am waiting for my port to complete).

Thoughts anyone?

Thanks

1bird2
Are we talking about the 286 or the 502?

I tried to set the 286 I have and found the same problem. DNS is back to 0.0.0.0 and no joy.