Quote Originally Posted by VOIPoJustin View Post
We've pushed out a small change in the HT502 default provisioning, enabling the 'Loop Current Disconnect' feature with a current disconnect duration of 200 milliseconds.

Essentially, all this does is cut the 'fast busy' signal you'd get when still on the phone after someone disconnects. This is probably most noticeable when you have an answering machine in usage instead of your voice mail, the caller hangs up, and your answering machine is left recording a long and annoying fast busy!
I dug up this old thread as it is still happening when I use the PAP2...I don't recall it doing this when I use the SPA2102 and the 502 is history..

I'm provisioned at the moment and these are the settings....
CPC Delay:2
Interdigit Long Timer:10

If you have the fix, please hard code it for me. If not and you want me to try some other timings, I will be happy to do so.

Thanks....

burris