Printable View
Hooked up my device yeterday! still not working! I plugged it directly into the modem and still not working. I now have it plugged thru my router.
http://img171.imageshack.us/img171/7...10220at909.png
yes the device is plugged thru the wan port. ??? whats wrong incoming call go to a busy signal? voicemail is enable!
Hi
It sounds like you tried to connect your ATA (WAN port) directly from your modem, is this correct? and did you have the radio button "dynamically assigned by DHCP" selected? It is generally best (if you are having problems) to get it working in front of your router first, for testing purposes and then work on moving it behind.
For the device to work behind your router - you need a couple of things. The router has to be set up to forward ports 5004-65000 UDP and make sure you have an IP address available from your router that is outside your router DHCP pool.
Your ATA settings: the IP address should be the local IP address that is assigned or outside of your router DHCP pool locally above. Your subnet mask is good. Your default router should be the local IP to your router. The DNS Server 1&2 should be a DNS server, I would use one of these DNS servers:
Service provider: Google
• 8.8.8.8
• 8.8.4.4
Service provider: ScrubIt
• 67.138.54.100
• 207.225.209.66
Service provider: dnsadvantage
• 156.154.70.1
• 156.154.71.1
Service provider:OpenDNS
• 208.67.222.222
• 208.67.220.220
Service provider: vnsc-pri.sys.gtei.net
• 4.2.2.1
• 4.2.2.2
• 4.2.2.3
• 4.2.2.4
• 4.2.2.5
• 4.2.2.6
Remember to reboot everything (modem, router, and ATA) after making any changes. Not necessary if just making changes to the ATA, in that case just reboot the ATA.
Hope this helps.
It appears my original post addressing the issue was blocked by a moderator. I suggest you open a ticket and go thru normal VOIPo channels for tech support.
i did. also to the adaptor doesnt show off-hook when a phone is plugged into the adaptor. the device now shows reg, but i put up the phone and get no dial tone, and if i try to dial the IVR *** nothing happens ether.Quote:
Originally Posted by voipinit
I had the same issue yesterday when replying to another HT-502 post.Quote:
Originally Posted by voipinit
It does appear that numerous strange names appear every day as registered.
Have you tried any other DNS?
4.2.2.3
8.8.8.8
Why should that be necessary?Quote:
Originally Posted by chpalmer
Some posts go and some get the message that they are being moderated and never get posted. What does DNS have to do with this?