No Dial Tone

**VOIPoTim** · 07-31-2008 08:05 AM

Originally Posted by chpalmer

Yes about two weeks ago...

Ill go sit in the corner now... (hangs head)

If it's still working though, it should be fine.

I know there was another case were it was upgraded and basically stopped working right after.

I see you have a ticket in so we'll look at it and keep it updated.

**chpalmer** · 07-31-2008 08:07 AM

Thanks Tim!

**usa2k** · 08-03-2008 10:48 AM

I never forced an update, but my GS seems hosed today.

I decided to check VM and it stays connected until I reboot the TA.
It does get dial tone after each reboot BTW.
All it does is make clicking popping noises. Hanging up won't disconnect.

The ZyXEL seems to be working fine!

Am I the only one? Maybe the GS just died?

EDIT: submitted a ticket since this is not common to anybody else!

**usa2k** · 08-03-2008 03:58 PM

Since I will be traveling, I am going to stick with the ZyXEL TA for now.
I am updating the ticket as such.

**chpalmer** · 08-03-2008 05:33 PM

I just noticed that once my son was finished with a call that the ethernet ports were still passing traffic as if in a call.

I dumped all the connections in the firewall Im using and it went away.

The server is still trying to reach the ATA however. Ive rebooted also.

My Ip:55660 <- 74.52.58.50:54856 keeps coming back right now. This is RTP traffic. Sip is connected fine.

Ive reset my states many times now. Firewall is stopping it at the door. but connection attempt remains. Related?

http://forums.voipo.com/showthread.php?t=656

Edit= Its not trying anymore...

**VOIPoTim** · 08-04-2008 11:20 AM

Anyone seeing issues, please contact us. As far as we know, everyone is all set now.

**myvoip07** · 08-04-2008 09:37 PM

In Advance setting tabs my HT286 show it is connected to zeus.voipwelcome.com? Has something changed recently after the firmware update? I had caller id issues but it is fixed after i open a support ticket.

Has anyone noticed this in your HT286?

**VOIPoTim** · 08-10-2008 04:38 AM

Originally Posted by myvoip07

In Advance setting tabs my HT286 show it is connected to zeus.voipwelcome.com? Has something changed recently after the firmware update? I had caller id issues but it is fixed after i open a support ticket.

Has anyone noticed this in your HT286?

All provisioned users will be moved around from time to time.

As long as we're the ones making the changes, you don't have to worry about it whne you see things like that. Everything is consistent on our end unlike some

**myvoip07** · 08-11-2008 09:08 PM

Originally Posted by VOIPoTim

All provisioned users will be moved around from time to time.

As long as we're the ones making the changes, you don't have to worry about it whne you see things like that. Everything is consistent on our end unlike some

Thanks for the update Tim.

That's fine with me. Noticed the difference after the firmware update you folks reverted back, so thought me to just let u folks know since i didn't know before that it would be like that.