Something stuck? No Vpanel or inbound calls

[Xponder1]

Sent. Port 1 I tested in and out both for 2 mins and they were fine.

[Xponder1]

Could you PM me your phone number, if you want to check a few last settings to make sure it is alright, otherwise whenever you are ready to revert feel free.

Also, what action gives you fast busy? Incoming Call, outgoing Call? etc?

Outbound calls and inbound did not work to the second port.

I tested by calling my cell phone then using my wifes phone to call the house.

[VOIPoTim]

Outbound calls and inbound did not work to the second port.

I tested by calling my cell phone then using my wifes phone to call the house.

Was port 2 set to central02 too?

[Xponder1]

Was port 2 set to central02 too?

Yes I just checked and made sure.

[scott2020]

I also get fast busy with outgoing calls on port 2.

EDIT: When I dial 11 digits it works. Dialing 7 digits on port 2 gives fast busy.

[Xponder1]

I also get fast busy with outgoing calls on port 2.

EDIT: When I dial 11 digits it works. Dialing 7 digits on port 2 gives fast busy.

As Brandon requested I tried a 1 800 number and it had the same issue and I called my cell XXX -XXXX and it had the problem. After reading your comment I tried dialing my cell with the area code and it worked fine.

[scott2020]

My static problem is pretty bad. I only can call from my cell phone. Other calls to other numbers from my cell are fine. It is static from the beginning of the ring in all the way to voicemail. Voicemail is all static as well. It is so loud I can't communicate. It seems to be only inbound calls right now. Also, my virtual number seems to be clear, so maybe it is something with my Level 3 DID here in MO.

[Xponder1]

I noticed port one has nothing in the outbound proxy field but port two has sip.voipwelcome.com

Does that matter?

[VOIPoTim]

I noticed port one has nothing in the outbound proxy field but port two has sip.voipwelcome.com

Does that matter?

Take out the sip.voipwelcome.com one.

[Xponder1]

Take out the sip.voipwelcome.com one.

Removed and rebooted same issue.